1. During use, once a foreign body is found to block the straw, it should be shut down immediately for inspection, and the foreign body should be removed before continuing to use. When using, fasten the hose, nozzle and connecting rod interface, especially the small gap nozzle, floor brush, etc., pay special attention.
2. If the sealing pad in the vacuum cleaner has aged and lost its elasticity, it should be replaced with a new pad in time. When there is a lot of garbage accumulated in the dust cup and dust bag, it should be cleaned up in time, and it is not necessary to wait until the dust full indicator light is on. In order to keep the ventilation path unobstructed, avoid blockages that cause suction drop, motor heating and reduce the service life of the vacuum cleaner.
3. Clean up the sundries in the bucket and various vacuuming accessories in time, clean the dust bag and dust bag after each work, check for perforation or air leakage, and thoroughly clean the dust grid and dust bag with detergent and warm water, and blow dry. It is strictly forbidden to use non-dry dust bags. Check whether the power cord and plug are damaged. After use, wind the power coil into a bundle and hang it on the hook of the top cover of the machine head. After the water absorption is completed, check whether the air inlet is blocked or not. Otherwise, it needs to be cleaned. Check whether the floating wave is damaged or not. The machine should be handled with care, and should not be impacted by external force. When the machine is out of use, it should be placed in a ventilated and dry place.
Post time: Jul-16-2022